Engraved identification label examples in contrasting colours, including MAIN SWITCH, DB-01, SOLAR MAIN SWITCH and FIRE PUMP

Traffolyte Switchboard Labels: Australian Ordering Guide

Traffolyte switchboard label ordering guide

How to Order Engraved Traffolyte Switchboard Labels

Engraved Traffolyte-style labels are widely used to identify switchboards, isolators, control panels, machinery and other electrical or mechanical equipment. The contrasting text is cut into a two-colour engraving laminate rather than printed onto the surface, creating a clear and durable identification label.

The difficult part is usually not manufacturing the label. It is confirming the correct wording, size, colour, fixing method and location before production begins. This guide explains what to prepare when ordering one replacement label or a complete project schedule.

01 — Wording

Finalise the label wording

Provide the exact text required on each label. Keep the wording concise, unambiguous and consistent with the approved drawings or switchboard schedule.

Common examples include:

  • MAIN SWITCH
  • DB-01
  • FIRE PUMP
  • AC ISOLATOR
  • SOLAR MAIN SWITCH
  • MECHANICAL SERVICES
  • IN THE EVENT OF FIRE DO NOT TURN OFF

Capitalisation, punctuation and line breaks should be supplied exactly as they are intended to appear. If a label needs two or more lines, show the preferred line break in the schedule rather than leaving it to be interpreted during production.

02 — Dimensions

Confirm the finished label size

The label must be large enough for the required wording and letter height while fitting the available mounting area.

Before ordering, confirm:

  • Finished width and height in millimetres
  • Maximum available mounting space
  • Number of text lines
  • Required letter height
  • Whether a symbol or logo is required
  • Whether holes, rounded corners or another special finish are needed

Our standard online sizes suit many common identification labels:

  • Small: up to 60 × 20 mm
  • Medium: up to 100 × 50 mm
  • Large: up to 100 × 100 mm

Labels beyond these standard size limits, unusual dimensions, multiple holes, symbols, logos and complete switchboard schedules can be quoted separately.

Do not select a smaller label only to reduce cost if it makes the specified wording or letter height difficult to read. Project requirements can differ substantially, so use the approved documentation rather than copying dimensions from another site.

03 — Colour combinations

Choose the colour combination

Traffolyte-style material has a surface colour and a contrasting core colour. Engraving removes the surface layer to reveal the text colour beneath it.

Available online colour combinations include:

  • White with black text
  • Black with white text
  • Yellow with black text
  • Red with white text
  • Blue with white text
  • Bright green with white text

The first colour describes the face of the label and the second describes the engraved text. For example, Red / White produces a red label with white engraved lettering.

Colour can carry a specific meaning on electrical and safety installations. Do not select it for appearance alone. Confirm the required colour convention with the electrician, specifier, approved drawings and applicable project rules.

04 — Backing and fixings

Select adhesive backing or mechanical fixing

The correct fixing method depends on the mounting surface and environment.

Industrial adhesive backing

Adhesive-backed labels are convenient for clean, smooth and suitable surfaces. The surface should be properly prepared before installation. Adhesive may not be appropriate for every outdoor, uneven, contaminated, high-temperature or high-vibration location.

Holes, screws, rivets or ties

Mechanically fixed labels may be required where the project specification demands a permanent fixing method or where the mounting surface is unsuitable for adhesive. Labels can also be supplied with holes for screws, rivets, cable ties or other approved fixings.

If holes are required, provide:

  • Hole quantity
  • Hole diameter
  • Distance from the edges
  • Preferred corner radius
  • Fixing method

Do not drill or modify a completed label without first checking that the remaining material and hole positions will be suitable.

05 — Label schedules

Prepare a switchboard label schedule

For a larger order, a spreadsheet or clearly structured list is faster and safer than entering labels individually.

Example schedule only: confirm each label’s wording, dimensions, colours and fixings for the installation.

On smaller screens, each label is displayed as a separate vertical record. On larger screens, scroll across the table to view all eight columns.

Reference Exact wording Width Height Face/text colour Backing or holes Quantity Notes
DB-01 MAIN SWITCH 60 mm 20 mm White/Black Industrial adhesive 1 Single line
FP-01 FIRE PUMP 100 mm 30 mm Red/White Two holes 2 Match drawing E-21

Keep one label per row. When several labels share the same size and colour, still list each legend separately so quantities and spelling can be checked.

A spreadsheet is preferred for a large schedule because each legend can be checked systematically. Customers can also provide a PDF, photograph, marked-up drawing or an existing label sample where appropriate.

06 — Production checks

Check the schedule before manufacture

Before approving production, check:

  • Every label against the latest drawing or schedule revision
  • Spelling, abbreviations and capitalisation
  • Line breaks and text hierarchy
  • Finished dimensions
  • Face and text colours
  • Adhesive or hole requirements
  • Quantity of each legend
  • Duplicate or missing equipment references
  • Whether the label is for an indoor or exposed location
  • Whether an authorised person must approve the final list

Changing a label after engraving normally requires it to be manufactured again. A careful schedule check is more efficient than correcting labels on site.

07 — Online ordering

Ordering a small batch online

For standard labels, choose the size and quantity, select the colour combination, choose adhesive or no adhesive, and supply the exact wording, including capitalisation and line breaks. For different legends, upload a label schedule with the quantity and wording for each label. Customers can also upload their label list, photograph, artwork or previous sample.

Each standard pack uses one size, colour and backing. Add a separate pack for each additional size, colour or backing; standard packs cover rectangular, text-only labels.

Order Custom Engraved Traffolyte Labels.

08 — Project quotations

Requesting a quote for a project schedule

Request a quote when the job includes:

  • Labels beyond the standard online size limits, including sizes larger than 100 × 100 mm
  • Several sizes or colour combinations
  • A complete switchboard schedule
  • Fixing holes or special shapes
  • Logos or symbols
  • Equipment plates and repeated legends
  • Unusual materials or finishes
  • Project quantities requiring coordinated production

Request a Quote for a Project Label Schedule with your wording, dimensions, colours, fixing details and quantities.

For related switchboard and equipment identification, Browse Electrical Statutory Signs.

09 — Answers

Frequently Asked Questions

Are Traffolyte labels printed?

No. The lettering is engraved through the coloured surface layer to expose a contrasting core. This is different from applying printed ink or a surface sticker.

Can every switchboard use the same label colours?

No. Colour requirements can depend on the function, installation, approved design, network rules and project specification. Confirm the correct convention before ordering.

Can I order one replacement label?

Contact us with the dimensions, colour, wording and a clear photograph of the existing label. Standard online packs are intended for common small batches; a replacement or unusual size may need a custom quotation.

Can I upload an Excel label schedule?

Yes. Upload the spreadsheet or send it with the quotation request. Use one label per row and include dimensions, colours, fixing details and quantity wherever possible.

Can labels be supplied with holes?

Yes. Provide the hole diameter, quantity and preferred positions. The fixing method should be confirmed by the electrician, switchboard manufacturer or project specifier.

Do you ship Australia-wide?

Yes. Standard and custom orders can be dispatched Australia-wide, with project and bulk pricing available where applicable.